C-ton Corporation

{name}{address}{city}{zipcode}{state}{country}{phone}
601 Magnetic Drive, Unit 34 M3J3J2 North York, Ontario
Phone: (416)-661-9191
  • 416-661-9191
  • 416-665-9594
  • keith@c-ton.ca

Crimping Tools

ZPT-NH-1

A ratchei-action crimping tool for quality crimping on non-insulated terminals and connectors, including rings, spades, male plugs, female receptacles, male and female quick disconnects in 22/16, 16/14, 12/10 and 8 AWG wire sizes. Each nest is clearly marked by wire size, Lightweight and easy to use.

zpt-nh-5

This lightweight, single-nested tool crimps insulated terminals, butt connectors, parallels, female receptacles and male plug in 24/20 AWG wire range. The ratchet-action assures a perfect crimp, for once the crimp is started, and the jaws cannot open until the crimp cycle is completed.

zpt-nh-11

This lightweight, single-nested tool is designed to crimp 22/16 AWG insulated male and female quick disconnects, female receptacles and piggyback disconnects. High quality crimping is automatic, as the ratchet-action assures completion of the crimping cycle before the jaws can be reopened for the next cycle.

zpt-nh-12

This lightweight, single-nested tool is designed to crimp 16/14 AWG insulated male and female quick disconnects, female receptacles and piggyback disconnects. High quality crimping is automatic, as the ratchet-action assures completion of the crimping cycle before the jaws can be reopened for the next cycle.

zpt-nh-13

In-line crimping action provides highest quality crimping of insulated 12/10 AWG terminals, butt connectors, parallels, male and female quick disconnects. Even unskilled operators can easily produce high quality, high output crimps, with its precession ratchet-action tool.

zpt-nh-30

This precession tool provides quality crimping of insulated 22/16 and 16/14 AWG terminals, butt connectors, parallels, male plugs, female receptacles and male and female quick disconnects. Clear markings identify proper crimping nest. Ratchet-action guarantees high quality crimp every time.

zpt-na-3

Versatile pneumatic crimping tool offers advantage of more expensive automatic terminating equipment. Operation is easy and dependable. The precession engineered crimping jaws and powerful air cylinder combine to assure consistent quality crimps. Operators on normal shop air of 85-100PSI.

zpt-na-3

With complete line of quick change crimping dies, the rugged NA-3 produces high quality crimps on a wide variety of insulated terminals and connectors in wire size 24 through 10 AWG. It includes closed-end connectors, male and female quick disconnects, butt connectors and more.

ZPT-NH-24

The lightweight, single-nested tool is expressly designed to crimp non-insulated 24/20 AWG terminals, butt connectors and parallels. High quality crimping is automatic even with unskilled operators. Ratchet-action assures completion of the crimping cycle before jaws can be reopened for the next level.

ZPT-NH-34/NH-35

These precision tools are expressly designed to crimp closed-end connectors. The NH-34 crimps connectors in the 22/16 and 16/14 AWG wire range, while the NH-35 crimps connectors in the 16/14 and 12/10 AWG wire range. Ratchet-action guarantees high quality crimp each and every time.

ZPT-NOP-38

This hand operated hydraulic tool crimps non-insulated terminals, butt connectors and parallels in 8, 6, 4 and 2 AWG wire sizes. A portable tool that controls the depth of crimp automatically as operator pumps up the cylinder to “perfect pressure, “thus avoiding both over and under crimping.

ZPT-NH-36

This lightweight, single-nested tool is expressly designed to crimp the B3635 closed-end connector. High quality crimping is automatic even with unskilled operators. Ratchet-action assures completion of the crimping cycle before the jaws can be reopened for the next cycle.

ZPT-NOP-100

Potable, heavy-duty hand operated hydraulic tool crimps non-insulated terminals, butt connectors and parallels in 6, 4, 2, 1/0, 2/0, 3/0 and 4/0 wire sizes. Automatically crimps terminals only after operator pumps up cylinder to “perfect pressure”- no under, or over-crimping, manual release.

ZPT-NOH-300K

Hydraulically operated crimping head, crimps 1/0 through 600 MCM terminals and connectors. Choice of hand operatedpump: NOP -700, foot operated: NOF- 300, or electric: NOM- 2500A. Cycles only after “perfect pressure” is reached, crimps and then releases terminal from jaws automatically. Easy to use.

ZPT-H12

The H12 is a scissor-action, pier-type tool with live crimping nests to speed production at lower costs. It provides quality crimping of 22-18 AWG and 16-14 AWG female slip-on, non-insulated, flag and insulated grip terminals. One tool crimps five types and sizes. Each nest is plainly marked for accurate usage identification.

ZPT-H46/ZPT-H47

These reliable, precision made tools speed production in crimping fully insulated flag slip on terminals. The H46 crimps fully insulated flags in the 22-18 AWG wire size and the H47 crimps fully insulated flags in the 16-14 AWG wire size. The ratchet-action of the tool assures an easy and quality crimp.

Tools

Cutter/Stripper with Dial CT-6007

Automatic Stripper and Crimper CT-6004

9 Inch Cable Cutter CT-605

For Crimping, Cutting-Stripping

Professional ZPT-HP

Crimper-Cutter-6 Station Stripper ZPT-1HD

Economy Crimper ZPT-2

Crimper-Cuter-6 Station Stripper Zpt-1

Stainless Steel Tools

Highest quality hardened stainless steel needles nose pliers and cutters. Precision ground and polished surface, durable springs and cushion grip handles make the tools an excellent addition to the tool box, 84-406-O and 84-418-O have screw pivot point features.

Cutter
CT-406 3-12"

Cutter
CT-408 4-1/2"

Needle Nose
CT-416 4" - CT-418 5"

Carbon Steel Tools

Hardened carbon steel cutters and needle nose pliers. Features includes cushion grip handles and springs.

Cutter
CT-410 4-1/2"

Needle Nose
CT-420

Needle Nose
CT-422